Latent Heat of Fusion of Ice Experiment

100 mL graduated cylinder (caution – glass)
12 oz or 16 ox Styrofoam cup
thermometer and ice (to be supplied by the student)

Energy is required to change water from a solid to a liquid, i.e. to melt ice. In this experiment you will measure the amount of energy needed per gram of ice. You must remove the same amount of energy per gram if you want to turn water from a liquid into a solid (freeze water).

Before you begin the experiment you should obtain some ice.
You will need a few ice cubes or about half a cup of crushed ice.
Put the ice in a bowl and let it sit at room temperature until you notice
that it is starting to melt. This will probably take 15 or 20 minutes.
In the freezer ice is kept at a temperature well below freezing. We
need to allow the ice to sit outside the freezer long enough that it warms
up to 0o C. The ice can’t get warmer than 0o C, once it gets to 0o C it
will start to melt.

Add 200 to 250 mL of warm or hot tap water (40o C or less) to the Styrofoam cup. This warm water will be the source of the energy used to melt the ice. We keep the warm water in a Styrofoam cup so that it doesn’t lose energy to the surroundings. Keep a record of the volume of water added to the cup. Measure and record the temperature of the warm water.

Add one or two ice cubes (or about ¼ cup of crushed ice) to the warm water and stir gently with the thermometer until the ice is completely melted. Try to be sure you just add ice to the warm water and that you don’t also add water in the bowl from ice that has melted. Once the ice is melted measure and record the water temperature. If the water temperatures drops to near 0o C or if you are unable to quickly melt all of the ice, you will need to repeat the experiment. You will need to use more water, less ice, or both.

Use the graduated cylinder to measure the volume of the water in the Styrofoam cup. This new volume will be larger than the initial volume because ti contains the water from the melt ice. Because water has a density of 1 g/cm3 (1 g/mL) you can use your measurement of water volume to determine the mass of water at the start and finish
of the experiment. The differences in masses is the mass of the ice that was melted.

Repeat the experiment at least one more time using a different amount of water, a different amount of ice, and perhaps a different initial water temperature.

Experiment Report Format

Title (5 pts) Your report should have a descriptive title Introduction (10 pts) This is perhaps the most difficult
part of the report to write. You must have a goodunderstanding of the whole experiment to be able to write
a clear and complete introduction.

The introduction should explain in fairly general terms what kind of measurement you tried to make and how
you made it. Don’t describe the experiment in detail here; that belongs in the procedure section of your report.

In the latent heat experiment, for example, you are trying to measure how much energy is needed to melt
ice. You need to add energy to ice to cause it to melt. What is the source of the energy in this experiment?
Energy is often invisible. In your introduction you should explain how you were able to measure how much energy
was added to the ice to cause it to melt.
Procedure (10 pts) Here you explain exactly how you carried out the experiment. Someone unfamiliar with the
experiment should be able to perform it using just your description of the procedure.

The procedure should be written in a narrative style rather than a numbered list of steps or instructions. Pictures can be very helpful and often save a lot of written description.
Data, Analysis, and Results (10-15 pts) Include your original data collection sheet, not a copy. If you draw a graph, use graph paper, make the graph large, and label the axes. You should include an example of all but the simplest calculations.
Be sure to include units where appropriate.

Are you looking for a similar paper or any other quality academic essay? Then look no further. Our research paper writing service is what you require. Our team of experienced writers is on standby to deliver to you an original paper as per your specified instructions with zero plagiarism guaranteed. This is the perfect way you can prepare your own unique academic paper and score the grades you deserve.

Use the order calculator below and get ordering with now! Contact our live support team for any assistance or inquiry.

Type of paper Academic level Subject area
Number of pages Paper urgency Cost per page:

Purchase Guarantee

Why ORDER at

  • Educated and experienced writers.
  • Quality, Professionalism and experience.
  • Original Content writing.
  • Best customer support.
  • Affordable Pricing on orders.
  • Thorough research.
  • Ontime delivery of finished work.
  • 100% plagiarism free papers.

Reasonable Prices

  • To get the best quality papers isn’t cheap so don’t trust extremely low prices.
  • We can’t claim that we have unreasonably low prices because low prices equal to low quality.
  • Our prices are good and they balance with the quality of our work.
  • We have a Moneyback guarantee.

Original and Quality work

  • Our writers are professionals and they write your paper from scratch and we don’t encourage copy pasting.
  • All writers are assessed and they have to pass our standards for them to work with us.
  • Plagiarism is an offence and it’s never tolerated in our company.

Native Writers plus Researchers

  • Our writers are qualified and excellent and will guarantee the best performance in your order.
  • Our team has writers who have master's and PhD qualifications who can handle any assignment
  • We have the best standards in essay writing.

We have been in business for over 7 syears

  • We have always served our customers from all over the world and they have continued to order with us.
  • We value our customers since they have trusted us to do their assignments.
  • We are competent in our writing gained from experience over the years
  • Our company has 24/7 Live Support.

You will get

  •  Custom Admission Essay written by competent professional English writers.
  •  Free revisions according to our revision policy if required
  •  Paper format:  275 words per page, Times New Roman font and size 12, doublespaced text and1 inch margin
  •  On time delivery and direct order download
  •  Privacy guaranteed

We can help you:

  •  acquire a comprehensive professional presentation.
  •  get a unique and remarkable content as per your instructions.
  •  Get an additional portion that can be included to your existing presentation;
  •  turn your work in to an eyecatching presentation with well communicated ideas.
  •  improve your presentation to acquire the best professional standards.